Failure Analysis of Nickel-hydrogen Cell Subjected to Simulated Low Earth Orbit Cycling

A nickel-hydrogen cell completed 10,080 simulated low earth orbit charge/discharge cycles at depths-of-discharge ranging from 50 to 80 percent prior to failure. The cell is of the Air Force design, rated at 50 ampere-hours, 8.9 cm (3.5 inches) in diameter. Upon disassembly, the end of the polysulfone core supporting the electrode stack was found to have fractured. This allowed the electrode stack to expand. A massive short was found at the inner diameter of the electrodes centered roughly at plate set 34 to 37 from the positive end of the electrode stack. The damaged area extended through approximately one third of the electrode stack, with the effect becoming progressively less with distance from plate set 34 to 37. Measured thicknesses of the positive plates were significantly greater than the initial specification values. The postulated cause of failure is that positive plate growth caused fracture of the shoulder from the end of the polysulfone core on which the electrodes are mounted. The electrode stack relieved and pressure points were created at the area near the inner diameter of the plates at the tab attachment. A short occurred at a pressure point between opposing plates and propagated to other electrode sets due to thermal and mechanical stresses caused by the short

NASA 50 amp hour nickel cadmium battery waste heat determination

A process for determining the waste heat generated in a 50-ampere-hour, nickel cadmium battery as a function of the discharge rate is described and results are discussed. The technique involved is essentially calibration of the battery as a heat transfer rate calorimeter. The tests are run at three different levels of battery activity, one at 40-watts of waste heat generated, one at 60, and one at 100. Battery inefficiency ranges from 14 to 18 percent at discharge rates of 284 to 588 watts, respectively and top-of-cell temperatures of 20 C

Sudbury project (University of Muenster-Ontario Geological Survey): New investigations on Sudbury breccia

Sudbury breccias occur as discordant dike breccias within the footwall rocks of the Sudbury structure, which is regarded as the possible remnant of a multiring basin. Exposures of Sudbury breccias in the North Range are known up to a radial distance of 60-80 km from the Sudbury Igneous Complex (SIC). The breccias appear more frequent within a zone of 10 km adjacent to the SIC and a further zone located about 20-33 km north of the structure. From differences in the structure of the breccias, as for example the size of the breccia dikes, contact relationships between breccia and country rock as well as between different breccia dikes, fragment content, and fabric of the ground mass, as seen in this section, the Sudbury Breccias have been classified into four different types. (1) Early breccias with a clastic/crystalline matrix comprise small dikes ranging in size from approx. 1 cm to max. 20 cm. (2) Polymict breccias with a clastic matrix represent the most common type of Sudbury breccia. The thickness of the dikes varies from several tens of centimeters to a few meters but can also extend to more than 100 m in the case of the largest known breccia dike. Contacts with country rock are sharp or gradational. Heterogenous matrix consisting of a fine-grained rock flour displays nonoriented textures as well as extreme flow lines. Chemical analysis substantiates at least some mixing with allochthonous material. (3) Breccias with a crystalline matrix are a subordinate type of Sudbury breccia. According to petrographical and chemical differences, three subtypes have been separated. (4) Late breccias with a clastic matrix are believed to represent the latest phase of brecciation. Two subtypes have been distinguished due to differences in the fragment content

Non-Flat Power Spectra in the CDM Model

Standard inflation with one scalar field produces primordial perturbations with a nearly flat ('Harrison-Zeldovich') power spectrum. Here we consider first, a double inflation spectrum, and second, a massive scalar field with an interaction potential which mimics an early quartic interaction, but fading away at a characteristic scale. We solve numerically the linear perturbation equations with initial conditions due to scalar field quantum fluctuations at the initial horizon crossing. The resulting power spectra are shown to be non-flat, exhibiting either a break or a valley. Using the transfer function of cold dark matter model we study the influence of the shape of primordial power spectra on observations of large scale structure in the universe. We compare the power spectra in redshift space with reconstructed power spectra from the IRAS catalogue. Further we discuss the variances of galaxy counts in cells, and the mass function of galaxy clusters. Comparison with standard CDM demonstrates the advantages and benefits of the more complicated initial spectra.Comment: gzip-compressed postscript file including figure

“Ineffective” competition: a puzzle?

Conventionally, we think of an increase in competition as weakly decreasing prices, increasing the number of consumers served, thus increasing consumer surplus, decreasing firms profits, etc. Here, we demonstrate that, under some tame circumstances, an increase in competition may lead to a price increase in a horizontally differentiated market. We show this relationship for the petrol market in German cities

Integrals of motion in the Many-Body localized phase

We construct a complete set of quasi-local integrals of motion for the many-body localized phase of interacting fermions in a disordered potential. The integrals of motion can be chosen to have binary spectrum $\{0,1\}$, thus constituting exact quasiparticle occupation number operators for the Fermi insulator. We map the problem onto a non-Hermitian hopping problem on a lattice in operator space. We show how the integrals of motion can be built, under certain approximations, as a convergent series in the interaction strength. An estimate of its radius of convergence is given, which also provides an estimate for the many-body localization-delocalization transition. Finally, we discuss how the properties of the operator expansion for the integrals of motion imply the presence or absence of a finite temperature transition.Comment: 65 pages, 12 figures. Corrected typos, added reference

“Ineffective†competition: a puzzle?

Conventionally, we think of an increase in competition as weakly decreasing prices, increasing the number of consumers served, thus increasing consumer surplus, decreasing firms profits, etc. Here, we demonstrate that, under some tame circumstances, an increase in competition may lead to a price increase in a horizontally differentiated market. We show this relationship for the petrol market in German cities.

The Boltzmann Equation in Classical Yang-Mills Theory

We give a detailed derivation of the Boltzmann equation, and in particular its collision integral, in classical field theory. We first carry this out in a scalar theory with both cubic and quartic interactions and subsequently in a Yang-Mills theory. Our method is not relied on a doubling of the fields, rather it is based on a diagrammatic approach representing the classical solution to the problem.Comment: 24 pages, 7 figures; v2: typos corrected, reference added, published in Eur. Phys. J.